Nine properties of the hottest concrete sealing cu

2022-08-19
  • Detail

Nine properties of concrete sealing curing agent

nine properties of concrete sealing curing agent

September 28, 2018

nine properties of concrete sealing curing agent:

I The extensometer and fixture are the most important holes in sealing concrete capillaries, which can effectively inhibit the entry of external pollutants into concrete capillaries Enhance the surface hardness and wear resistance of new and old concrete floors Improve the compressive strength of new and old concrete floors Resist the erosion of oxides

v Inhibit the erosion of chemical substances

VI React with chemicals in concrete to form a kind of gel in its pores Prevent concrete from peeling and scattering

VIII Seal the concrete and enhance its strength

IX After mechanical polishing, the concrete floor appears marble luster. The longer it is used, the better the gloss. Performance characteristics:

1 Hard: the Mohs hardness of the ground treated with concrete sealing curing agent will reach 8, and the Mohs hardness will increase by 45.3%

2. Wear resistance: the concrete sealing curing agent can cure various components in the concrete into a hard entity to increase the hardness and compactness. After the ground is matured, the wear resistance will be increased to more than 8 times

3. Dust prevention: the concrete sealing curing agent reacts with the concrete to form a dust-free and dense whole on the concrete surface, which permanently controls the precipitation of concrete dust from the surface gap

4. Anti skid: for general concrete floors, the salt and alkali components will separate out from the surface and lead to the American ASTM E (8) grade 41 standard, causing the Chinese coating to slip. After being treated with concrete sealing curing agent, the concrete surface forms a solid and dense whole, and the salt and alkali components will not be separated from the surface

5. Compressive strength: the compressive strength of the treated sample is 27.3% higher than that of the untreated sample, and the flexural strength is increased by more than 3 times

6. Impermeability: it can effectively penetrate into the concrete and react chemically with it, lock the pores inside, have a permanent sealing effect on the concrete surface, and effectively prevent water, oil and other surface contaminants from entering the concrete

7. Weathering resistance: UV and water spray have no adverse effect on the treated samples It can effectively prevent the passage of chloride ions The test shows that the treated ground will not be affected by exposure to electromagnetic or water mist

8. Corrosion resistance: the treated ground will greatly improve the performance of concrete. For example, corrosion resistance constitutes the impact appearance, which is usually caused by buffer failure

9. Brightness: the concrete floor treated with concrete sealing and curing agent will appear marble like luster, and the longer it is used, the better the gloss

Copyright © 2011 JIN SHI