The hottest wire connector must let workers connec

2022-08-14
  • Detail

If you want to let the workers connect the wire connectors like this, the old electrician will understand that the service life of the circuit will be increased by at least ten times

if you want to let the workers connect the wire connectors like this, the old electrician will understand that the service life of the circuit to the counter will also be increased by 10 times less

when the house is decorated, water and electricity wiring is a very basic project, and if there is no professional master to connect the circuit during the decoration, there will be a lot of trouble in the later stage, When some workers decorate the circuit, they don't need to use the correct method for convenience. If you stay a little longer, you will find that there are often problems in the circuit and it is easy to leave hidden dangers. There is a big gap between the wire connection instrument industry and foreign countries. Remember to let workers connect like this. Old electricians can understand it at a glance, which can improve the service life of the circuit

generally, when connecting wires, the master will first tear off the insulating skin of the wires, and then screw the copper coins together. This method is believed to have been seen by many people. It is a relatively common method. The connected wires can also realize overtaking in curves, which is relatively firm

however, some people think this method is too simple, but in fact, if it is not professional, it is difficult to deal with the wire connector. When connecting the wire, if it is not professional, and the hydraulic oil pump is an important part for transporting the hydraulic oil pressure, it is easy to break the wire. If it is not found during installation, then if it is used later, you will find that it is often short circuited during construction, It is best not to bend the wire, which will not only affect the appearance, but also affect the normal use of the line

when professional electricians connect wires, they will add an extra step, that is, wrap the wire head with an electric soldering iron. In this way, they can wrap it with electrical tape, so that they are not afraid of leakage accidents, and it is relatively safe to use electricity at home

if you want to connect wires at home, you'd better use such a method. Old electricians connect wires in this way at home, which is not only beautiful and firm, but also very safe and practical

Copyright © 2011 JIN SHI